Product Categories

UV Adhesive Glue

[8]

Contact Now

Shenzhen KangLiBang Technology Co., Ltd

Visit Website

City:shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MrGary

View Contact Details

Contact Now

Self Adhesive Rtv 2 Liquid Silicone Rubber Liquid For Mould Making Coating

Ask Latest Price

Video Channel

Certification :SDS

Place of Origin :SHENZHEN

MOQ :1KG

Payment Terms :T/T

Supply Ability :20kg/barrel

Delivery Time :15

Price :$10-$100

Property 7 :Tensile Strength

Property 11 :Temperature Resistance

Value 15 :Mold making, gaskets, seals, medical devices, etc.

Value 1 :Silicone

Property 14 :Electrical Insulation

Property 5 :Curing Method

Value 8 :200-800%

Property 10 :Specific Gravity

Value 10 :1.1-1.5

Value 2 :Liquid

Property 12 :Chemical Resistance

Material :silicone rubber

Value 4 :Low to High

Value 5 :Platinum-catalyzed

Value 13 :Good

Contact Now

Add to Cart

View Product Description

Sprayable Self Adhesive Silicone Coating

KANGLIBANG® Silicone rubber

Product Description

KL-2680AB-50 ,Self adhesive silicone coating serves as heat fast curing sprayable version liquid silicone coating which adheres to the glass and silicone rubber products surface sparing from the use of silicone primers on the glass and silicone rubber products substrates.

Attention

1, The user should make changes based on spraying thickness and weather conditions (Temperature ,humidity).

2,The solvent is suppose to be blended solvent. xylol :Ethyl acetate:Cyclohexanone=80:15:5 or Tolune : Butanone =1: 1. too much water in the solvent will cause rough surfaces of liquid silicone coating.

3,The-ready-to-bond glass substrates should be washed clean till no dusts and oil dirts.

4 ,Check during spraying coating process , control the viscosity of the liquid silicone, make sure enough coating amount and get it cured completedly. 5,The spraying environment counts , It is advisable to adopt dust-free plant for production .Temperature controlled at 25～35℃. Humidity controlled at 25～50%. 6, The mixed liquid silicone must be used up in 6 hours , stop use the material when found viscosity increase or material get hardened

Processing

It is advisable to take KL-2680A and KL-2680B based on solid contents 25% (Weight ratio) KL-2680A:KL- 2680B:Solvent=100:100:200. 1,Take the KL-2680A and KL-2680B based on proportionated weight ratios and add the solvent lots by lots. mix evenly with 20-40 minutes . 2,Spray the mixed liquid silicone evenly on the glass and silicone surfaces.

3,When the spraying thickness is10μm ,bake with 150℃ for 2minutes. The baking time is determined by the baking temperature and spraying thickness. when the spraying thickness is 20μm, baking time should be increased to 3 minutes(Note : Data for reference only, please make change based on specifical situation )

Inquiry Cart 0